Hi Oms,
Try this, the ini file entry works for me with DXbase logging and WL.
John WA9ALS wrote:
> I figured out how to do it. Add this entry to the rigs section of the INI
> without changing the rig and you will be able to control the 756pro II
using
> the 756 pro entry (thanks WA9ALS for the website/info):
> [RIGS]
> Icom IC-756PRO=0x64
So it looks like we can do it either of 2 ways:
1. Leave the default rig address of 64 and do the ini entry above,
OR
2. Don't do the ini entry, but change the rig's menu item from 64 to 5C.
The latter is the way I've done it.
Either way, it works FB! 73
Try this it should work if you know the CI-V address.
73
Chris, AB1R
----- Original Message -----
From: "Ron Stordahl" <ronald.stordahl@digikey.com>
To: <py5eg@inepar.com.br>; "'WRITELOG'" <writelog@contesting.com>
Sent: Sunday, August 04, 2002 13:53 PM
Subject: Re: [WriteLog] icom 756 pro II
> Did you set your 756 Pro II to the address used by the Pro I? I don't
have
> the radio in front of me now, but look in the manual on how to set the
> radios address. It will be '64'. You need to set it to '5C'. At least
> that is what I did here to get it to work with WriteLog.
>
> Ron N5IN
>
>
> ----- Original Message -----
> From: "PY5EG" <py5eg@inepar.com.br>
> To: "'WRITELOG'" <writelog@contesting.com>
> Sent: Sunday, August 04, 2002 12:01 PM
> Subject: [WriteLog] icom 756 pro II
>
>
> > Hi Folks:
> >
> > I'm trying to connect my new IC 756 PRO II to WL version 10.34,
> and
> > there is no way to get through.
> > With the DX4WIN, no problem at all.
> > Someone has some info about it?
> >
> > Thanks
> > Oms
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> >
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|