To: | <writelog@contesting.com> |
---|---|
Subject: | [WriteLog] CW Setup |
From: | ke9v@att.net (Jeff Davis) |
Date: | Sat, 3 Aug 2002 11:28:38 -0500 |
I am trying to get WriteLog to key my FT-100D via the CAT interface. WriteLog seems to be able to read the frequency and mode from the rig, and it can set the freq/mode (although I notice it seems to default to CWR instead of CW). I think I have things set up to allow the rig to be keyed from the COM port. When I try to send something vi the CW keyboard the rig switches to transmit but there is no output. This leads me to think there must be some setting in the 100D that I don't have right. Any clues would be appreciated. 73, -- Jeff |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [WriteLog] USB support yes LPT and Com support no, Dave L Thompson |
---|---|
Next by Date: | [WriteLog] Default CW Speed, <SteveBaron@StarLinX.com (Steve Baron - KB3MM) |
Previous by Thread: | [WriteLog] USB support yes LPT and Com support no, Dave L Thompson |
Next by Thread: | [WriteLog] Serial numbers., Miguel Teixeira |
Indexes: | [Date] [Thread] [Top] [All Lists] |