Sorry, wrong URL.. it's www.geocities.com/writelog not /aa5au which
is my home page. You can get to my WriteLog website from my home
page though.
----- Original Message -----
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
To: "doug shock" <k0zu@adelphia.net>; <writelog@contesting.com>
Sent: Monday, July 22, 2002 6:15 PM
Subject: Re: [WriteLog] RTTY issues with MMTTY and DXP-38
> Doug,
>
> Try this. Open the RTTY window. Then change the TU from MMTTY
> to Dumb Terminal. You may get a Rttyrite error. Ignore it, close Rttyrite
> if it doesn't close on it's own. Restart Rttyrite. Choose DXP38 as the TU.
>
> This should work.
>
> The MMTTY Plug-in for WriteLog is an added feature but is not part of
> the WriteLog program. It is still in "beta" form. It seems to act
> differently
> depending on operating system and other things. I have problems with it
> myself. I did not write it but seem to have as much experience using it as
> anyone and that is why I put what information I have obtained on my WriteLog
> website at www.geocities.com/aa5au.
>
> WHEN CHANGING FROM MMTTY TO ANOTHER TNC WITHIN
> RTTYRITE, YOU WILL MOST LIKELY GET AN ERROR. Don't worry
> about it. Click OK on the error message and let Rttyrite close. Reopen it
> and it should be set for the TNC you tried to select.
>
> Also, when changing ports within the Rttyrite window and trying to change
> out of MMTTY, you may be a "port not available" message. Before changing
> the TU to dumb terminal, try setting the port to None first. You may get an
> initialization error when you restart the Rttyrite window, but you can then
> change
> to the correct port and it should initialize OK.
>
> I run dual receive on two radios - MMTTY and DXP-38 on each radio/computer.
> There is information on how to run dual receive on the above URL.
>
> 73, Don AA5AU
>
>
> 73, Don AA5AU
>
> ----- Original Message -----
> From: "doug shock" <k0zu@adelphia.net>
> To: <writelog@contesting.com>
> Sent: Monday, July 22, 2002 3:54 PM
> Subject: [WriteLog] RTTY issues with MMTTY and DXP-38
>
>
> > I installed MMTTY just to do it and play with it. I normally use a Hal
> > DXP-38. Well, now I can't use the Hal. When I bring the RTTY window up it
> > initializes MMTTY. Then I try and select the DXP 38 but get an error with
> > RTTYl~1.exe. Any ideas? I am using win2K and 10.33
> >
> > Doug / K0ZU
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
|