Thanks to K4WI, KB3MM, and N5NA, my problem is resolved by
editing the WriteLog.ini file as Alan, N5NA, advises:
>1. Open up WRITELOG.INI (Start Menu, Run, type in
WRITELOG.INI <ENTER>).
>2. Find the [PORTS] section and add the CW_ON_PIN1=1 line:
>
>[PORTS]
>CW_ON_PIN1=1
>
>73,
>
>Alan N5NA
In addition to inserting this line in WriteLog.ini, I also
stopped every TSR and virus checker I could find, and my
system worked perfectly with LPT1 keying CW during the
entire IARU contest. Problem solved! Those TSRs included
Symantec Norton SystemWorks 2002, ZoneLabs Pro, and
AdSubtract. Of course, since I made all these changes at
once, I have no way to prove what actually cured the
problem! I was in a hurry for the contest, so couldn't
properly research it by testing each possible fix one at a
time!
Thanks again for the instant help!
Bill N1AU
----- Original Message -----
From: Bill Santelmann
To: reflector Writelog
Sent: Friday, July 12, 2002 9:47 PM
Subject: [WriteLog] My CW is chopped up in 10.33C
WriteLoggers,
I'm using LPT1 CW keying in W98SE that worked very well
with
version 10.27, but I'm having trouble with version 10.33C.
Basically, when CW is sent portions of each character are
often removed, sometimes turning a dah into a dit. I can
send my call sign N1AU perfectly only about half the time
from a function key message.
Is this problem unique with me, or have others experienced
it also? I'll use an external keyer until I can figure it
out.
Thanks!
Bill N1AU
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
|