If you are connecting to the telnet session via Computer A and have WriteLog
open on Computer A (Packet Window using a Telnet session), then you should
have Computer B open the Packet Window and select 'local network' and select
Computer A as the networked computer that has the packet connection.
CU...Scot, K9JY
See K9JY's WriteLog User Support Site at:
http://www.k9jy.com
mailto:scot@k9jy.com
-----Original Message-----
From: writelog-admin@contesting.com
[mailto:writelog-admin@contesting.com]On Behalf Of Sante - IK0HBN
Sent: Friday, July 12, 2002 6:58 PM
To: writelog@contesting.com
Subject: [WriteLog] Telnet
Hi WL fellows,
is WL able to connect a telnet node if the modem is on another PC?
Here, computer A runs Internet and it's linked to Computer B (radio PC) via
2 ethernet cards. On computer B there is WL and even if from that computer
I can surf the WEB, it seems that selecting Telnet window, putting the IP,
it does not connect. OS is WINXP for both computers. I have also selected
Local Network without success. May be it could depend as WL is only on
radio computer.
Where I fault?
Tnx.
Sante
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
|