WriteLog
[Top] [All Lists]

[WriteLog] pk-232

To: <writelog@contesting.com>
Subject: [WriteLog] pk-232
From: rlcarroll@rcn.com (Robert Carroll)
Date: Sat, 25 May 2002 08:48:54 -0400
A good decoder can also pick out signals at negative SNR.

-----Original Message-----
From: writelog-admin@contesting.com
[mailto:writelog-admin@contesting.com] On Behalf Of Gil Baron
Sent: Saturday, May 25, 2002 7:38 AM
To: Wil DJ7AA; Don Hill AA5AU; writelog@contesting.com
Subject: RE: [WriteLog] pk-232

If the CW is machine sent then the computer can beat the hell out of
your
brain at high speed. At slow speeds, perhaps not!


> -----Original Message-----
> From: writelog-admin@contesting.com
> [mailto:writelog-admin@contesting.com]On Behalf Of Wil DJ7AA
> Sent: Saturday, May 25, 2002 4:28 AM
> To: Don Hill AA5AU; writelog@contesting.com
> Subject: Re: [WriteLog] pk-232
>
>
> The best ting is, to use your own ears for CW receiving.
> No machine can beat the human brain, ore i am wrong??
>
> 73 Wil DJ7AA
> ----- Original Message -----
> From: "Don Hill AA5AU" <aa5au@bellsouth.net>
> To: <writelog@contesting.com>
> Sent: Saturday, May 25, 2002 5:50 AM
> Subject: Re: [WriteLog] pk-232
>
>
> > It's possible to send CW with a PK232 with WriteLog.  Receive is a
> > different story - you can receive CW with a PK232 with a lot of
trouble
> > which I won't go into.
> >
> > It's been so long since I've used the PK232 for CW that I don't
remember
> > how to do it other than to say to go to the Setup menu and choose
Ports
> > and select PK232 for CW Keyer type.  You may have to hit a
> couple function
> > keys to get it start at first.
> >
> > The problem with using the PK232 for CW is that the buffer gets full
and
> > it quits working.  You have to turn it off, then back on for it to
start
> working
> > again.  I even disconnected any audio going to the unit and the
buffer
> still
> > filled up.  I never found a way around it.
> >
> > The best thing to do is to build a simple circuit to replace
> the PK232 for
> > transmit on the COM port.  Unplug the PK232 from the COM port and
put
> > in a simple circuit as shown at
http://www.aa5au.com/rttyinterface.html.
> This
> > type of circuit give out clean CW with ease.
> >
> > This circuit is good for FSK, PTT and CW with WriteLog.
> >
> > 73 & Good luck,
> > Don AA5AU
> >
> > ----- Original Message -----
> > From: "John - vk4cej" <vk4cej@uq.net.au>
> > To: <writelog@contesting.com>
> > Sent: Friday, May 24, 2002 10:03 PM
> > Subject: [WriteLog] pk-232
> >
> >
> > Is it possible to use WriteLog and a PK-232 to send and receive CW
???
> >
> > I have had a quick look through the PDF file and couldn't find any
> specific info.   Any help would be appreciated
> >
> > John
> >
> >
> > --- StripMime Report -- processed MIME parts ---
> > multipart/alternative
> >   text/plain (text body -- kept)
> >   text/html
> > ---
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog



<Prev in Thread] Current Thread [Next in Thread>