Hi All,
anyone nows the correct part number of the 8 PIN DIN (162 degrees I think)
banddata out connector
located on YAESU tranceivers and also used on some Kenwood models before.
If so pse send me info
If you now a supplier in USA pse tell me also I will be in Dayton next week
and maybe can pick them up there
73 Guy ON4AOI
AUTOMATIC BAND-DECODER and related stuff at
http://users.skynet.be/ON4AOI/banddecoder.shtml
DX4WIN soft and related stuff at
http://users.skynet.be/ON4AOI/dx4win.shtml
DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at
http://users.skynet.be/ON4AOI/keyer.shtml
ARSWIN link and related stuff at
http://users.skynet.be/ON4AOI/web7.htm
DXTELNET soft and related stuff at
http://users.skynet.be/ON4AOI/dxt.shtml
MY SALESPAGE with radioamateur & computer parts
http://users.skynet.be/ON4AOI/sale.shtml
----- Original Message -----
From: "Vlad UA6JD" <kea_company@fromru.com>
To: <dx4win@mailman.qth.net>
Sent: Wednesday, May 08, 2002 8:33 AM
Subject: Re: [Dx4win] IOTA update OC182, OC089
> Hello DX4WIN users-
>
> Sunday, May 05, 2002, 11:26:21 AM, RZ6HGG wrote:
>
>
> AK> OC182,"Ducie Island",-124.48,-24.39
> AK> OC089,"Baker Island",-176.5417,0.2292
>
> If you see File|Databases|IOTA| and table with:
> No IOTA Fullname Longitude Latitude
>
> But if you see import file of IOTA it was
>
> OC182,"VP6D Ducie Island",-24.500,-125.000
> OC183,"VK6 W Aus State (SW Coast) Centre",-29.200,114.500
> OC184,"V85 Brunei'S Coastal Islands", 4.700,114.700
>
> So first indicate Latitude and then Longitude - in FILE!!!!!
>
> BTW I am using (Thanks to UA6AF) modify file of database with
> prefix before Name of Island - it was help when you check prefix by F1.
> If anybody need it I can send as attach zip file with about 16kB.
> --
> Best regards,
> Vlad UA6JD
> mailto:kea_company@fromru.com
>
>
> _______________________________________________
> Dx4win mailing list
> Dx4win@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>
|