On Mon, 25 Feb 2002 08:59:59 -0800 (PST), Jim Reisert wrote:
>MMTTY stand-alone has NO rig control. Single transistor interface for PTT.
>When using Writelog, am using rig control.
_________________________________________________________
That's not what the help file says, and I quote:
"MMTTY is able to communicate with modern radios through a serial or COM
port. MMTTY can do several things through this port, as long as the
radio is prepared to perform these functions
· Control transmit/receive via software command.
· Read the frequency in the radio and put it in the log.
Be sure to read the topic on transmit/receive control, which is dealt
with separately in this Help file."
Bill, W7TI
|