John, I think you should drop back to a simple one radio, one soundcard
configuration with writelog+MMTTY+PLUGIN and get it working. then
substitute the second radio into this same setup, noting any special
settings required at each stage. Then go with the two simultaneous radios
and make sure all settings are correct. Make sure AFC is off on MMTTY, or
this will add confusion.
Don't forget that you can move the MMTTY passband over to where the audio
is with the MMTTY control, or move the radio's passband over to where MMTTY
wants it with the radio's passband control. Check the MMTTY control
carefully. I forget what it is called, but it lets you move the passband
around.
Good Luck
Jerry W4UK
At 08:31 AM 2/16/2002 -0500, WA9ALS - John wrote:
>This didn't fix my problem, but it's interesting nevertheless. These will
>be posted sometime this weekend on the web for future reference.
>
><SNIP>
>Any elucidating comments and commiserations are welcome! Before offering
>suggestions though, please remember that this doesn't have anything to do
>with how the radios are set. Either of my radios, when played through the
>Soundblaster, work fine with the signal in the passband where it should be.
>However, EITHER of the radios, using any filter, have the signal outside the
>MMTTY range when played through the Integrated sound. 73 - John (WA9ALS)
>
>
>_
|