WriteLog
[Top] [All Lists]

[WriteLog] IC765 vs IC756

To: <writelog@contesting.com>
Subject: [WriteLog] IC765 vs IC756
From: w7ti@dslextreme.com (Bill Turner)
Date: Mon, 11 Feb 2002 09:02:34 -0800
On Sun, 10 Feb 2002 20:11:18 -0800, Bob Green wrote:

>Check the address. Perhaps the '756 and the '765 use different addresses. I
>know the '756 and the '756PRO have different addresses. If they are
>different, having the right baud rate won't help at all. I manually set the
>baud rate to 19.2K on both WL and my '756PRO and it works great!

_________________________________________________________

Someone should smack ICOM's wrist over this one.  Yaesu, too.  

Kenwood radios all use the same addressing scheme.  Set up one, you
setup all.  And the '870 even has a DB-9 connector, bless their heart!!!

73, Bill W7TI

<Prev in Thread] Current Thread [Next in Thread>