> From: Jamie Dupree NS3T
>
>
> It works fine right now - CW is flawless, etc. I have tried both radio
> Right and Left - but often the frequency "button" will say "No
> Rig!" when I transmit in CW. It would just be nice to solve this
> before the ARRL DX test.
"No Rig!" when transmitting can be a symptom of RFI on the control
line. Try transmitting into a dummy load (or turning the power all the
way down) just to confirm it's not RFI. If it is, try the "snap on"
(split) cores with three or four turns of the control cable.
|