I'd like to know the answer too - same problem with the DXP38 TNC. Usually my
noise level is high enough that the squelch is opened anyway, but would like
to be able to turn off the rig and have the squelch take over. Somehow
WriteLog bypasses this function.
73, Duane
"DJ3IW Goetz" <k0869565@tiscalinet.de> wrote:
Hello
and thanks to all, who answered my previous plea for help.
Having the WriteLog window active and hitting the F-keys
produces nice, clean Baudot - I always tried to transmit out of
the Rttyrite window.
Now I have another, PCI-3000 specific question:
When I activate the Rttyrite window and have the RX on, endless garbage
is printed in the receive screen. The PCI-3000 has a print squelch
function that needs to be activated and set properly. WF1B RTTY provides
a "talk to TNC/TU" function for this purpose (and some other PCI-3000
specific parameters). Where and how can I do this in WriteLog/Rttyrite?
My guess is the WriteLog.INI - but how? Please answer direct to my email
address.
73 de Goetz, DJ3IW
k0869565@tiscalinet.de
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
Duane Calvin, AC5AA
Austin, Texas
____________________________________________________________________
Get free e-mail and a permanent address at http://www.amexmail.com/?A=1
|