Thanks to all who responded. This tells me exactly what I needed to
know. Thanks Wayne.
73, George .. W1ZT
----- Original Message -----
From: "W. Wright, W5XD" <w5xd@writelog.com>
To: "'Writelog'" <WriteLog@contesting.com>
Sent: Saturday, January 19, 2002 11:07 AM
Subject: RE: [WriteLog] LPT Changes in 10.29 and 10.30
> WL version 10.28 and earlier drive pins 1 and 17 on the LPT port with
> the CW signal. Pin 1 goes low for key down, and pin 17 goes high for
> key down.
>
> Version 10.29 changed to hold pin 1 low all the time.
>
> Version 10.30 added an INI entry
> [ports]
> cw_on_pin1=1
> If you add this INI entry, it signals CW on pin like 10.28 and before.
>
> Wayne
|