WriteLog
[Top] [All Lists]

[WriteLog] (no subject)

To: <writelog@contesting.com>
Subject: [WriteLog] (no subject)
From: gbaron@charter.net (GilBaronW0MN)
Date: Sun, 6 Jan 2002 22:45:45 -0600
> -----Original Message-----
> From: Jerry Flanders [mailto:jflanders2@home.com]
> Sent: Sunday, January 06, 2002 22:30
> To: GilBaronW0MN; WriteLog@contesting.com
> Subject: Re: [WriteLog] (no subject)
>
>
> You could run MMTTY in full-screen on a separate computer as a
> RTTY decoder
> and direct it's decoded output to a serial port, then patch this port to
> the computer running WL and tell WL it is a dumb terminal. This
> would give
> you the conventional MMTTY look (on that other computer's screen) and you
> would have the full-screen MMTTY controls.
>
> I did this last year before the plug-in became available. I wasn't
> interested in the waterfall then, and don't know how much of it I could
> have viewed.
>
> You actually pass 3Khz of that bedlam to your sound card? I use
> filters in
> my radios.

I pass it and VERY seldom does it cause a problem. Seeing the entire band is
a much greater benefit than the occasional de-sense problem that I VERY
seldom have is .

>
> Jerry W4UK
>
> At 06:38 PM 1/6/2002 -0600, GilBaronW0MN wrote:
> >think it would be really nice and a great help to higher scores
> if WriteLog
> >would make full use of MMTTY the way Zakanaka does. With
> Zakanaka you get AT
> >LEAST 3 Khz on the Waterfall and more is possible. With WriteLog
> and indeed
> >with MMTTY itself, you only get about 1 Khz or less.
> >I realize this is not a big thing but I would really love to see this
> >improvement.
> >Perhaps it could be configurable for those that would rather not
> have that
> >wide of a waterfall?
> >
> >
> >Gil Baron http://webpages.charter.net/gbaron
> >44:04.925 N 92:30.758 W 1055'
> >"Hierro candente, batir de repente"
> >
> >_______________________________________________
> >WriteLog mailing list
> >WriteLog@contesting.com
> >http://lists.contesting.com/mailman/listinfo/writelog
>
>


<Prev in Thread] Current Thread [Next in Thread>