Steve wrote:
> Sound card generates an audio signal. CW is NOT an audio signal.
>
> Take a look in the HELP file. You need a simple transistor circuit
between
> your serial port and the rig.
Thanks Steve and all others who are responding:
Now lets go a step further:
I have a USB port, a 25 pin port ( I assume parrallel port )(
Printer is hooked to another spot ) and a 15 pin port on the sound
card that is lobeled
"joystick" ( which I don't use )
Which of these will work the best?? Is the "joystick" a serial
port??
When I build the interface and hook it up, will windows recognize it
and address that port or do I have to assign it??
Thanks agian and happy holidays to ALL:
Jerry N0JRN
|