Many thanks to Bill, Steve, Jim and Ric for their responses. Looks like I will
go with the PCI card as it is an easy install and no problems. Some of the
cautions with the USB Adapters is RFI problems and 5 bit FSK. Now if I can just
get it here and up and running before Round Up I'll be OK. Thanks again.
Happy Holidays,
Earl..
============================================
Earl wrote:
>
> Well I finally had to bite the bullet. I am upgrading the computer on my Radio
> bench. The new computer is a Dell Pent III 800 Mhz. It has one serial port and
> two USB ports. I have seen a lot of comments about the PCI serial port
> adapters
> by Bite Runner but is anyone using one of their USB/Serial Converters with
> Writelog or any Ham related software (TNC, Radio-control, Rotor-control etc.).
> TIA.
>
> Earl..
> --
> Earl F. Smith - N5ZM
> PO Box 20065
> White Hall, AR 71612-0065
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
--
Earl F. Smith - N5ZM
PO Box 20065
White Hall, AR 71612-0065
|