I'm really going a bit crazy trying to make this work.
FT1kMP, MMulty.
MMulty works PERFECTLY with the MP in RTTY mode in the standalone version.
It keys the rig using com 1 via a interface.
It sends rtty and I have no problem working most people.
The version is MMtty Ver1.61 with a Creative SoundBlaster awe value.
But I CAN'T make it work with Writelog.
I have the plugin, it is installed and shows in the TU selection menu.
When I key a buffer, the MP goes into ptt for the proper length of time to
send a buffer but the only thing I hear is a steady carrier.
Again using MMulty standalone I hear the diddle sound of the baudot as it
sends the buffer or message.
Using Writelog in cw mode works normally to send a buffer keying the ptt
line and sending cw.
I have 4 comport, 1 is cw, 2 is the MP com5 and 6 unused.
All mode PTT on cw port
Windows sound card
PC Generates
I have soundcard spk output via audio transformer to shift pin of the rtty
connector.
Obviously this is correct as the soundcard works with MMulty standalone.
Obviously the soundcard is ok as it works with MMulty standalone.
A clue perhaps is in the Options of the MMulty plug in tuning window the
Misc TX port only allow Sound to be chosen.
In MMulty standalone, I get the constant carrier if I choose Sound. I must
choose either of the two that include the TxD(FSK).
------------------------------------------------------------
Availability is a function of time. The minute you get interested is the
minute they find someone else.
------------------------------------------------------------
Bill H. in Chicagoland
w9ol@billnjudy.com
|