The packet window has the same type of terrible behavior. DOn't use that
window very much, but when you really needed it the situation is very
difficult at best...
----- Original Message -----
From: "Richard Zalewski" <w7zr@citlink.net>
To: "Writelog" <writelog@contesting.com>
Sent: Monday, October 29, 2001 14:49
Subject: [WriteLog] New Post Contest Thoughts
> Here the program operated flawlessly. It was a pleasure and using it in
> some "throw away" contests prior to one of the big ones sure paid off.
>
> I do have a couple of items for the wish list.
>
> I used the packet window hooked up to a telnet site. Lots of posts. What
> was happening to me is that as I was scrolling through the list in the
> "mult" window and a new spot came in, it would take me to the top or the
> bottom of the list immediately and I had to start my search again. This
was
> a real pain. Somehow when scrolling through and a new packet comes in
some
> actions need to be suspended.
>
> I feel that when coming back to your run frequency after a spot switch,
the
> F12 key should erase the text in the call window.
>
> I second the motion on the restart and having to load the spots again.
Also
> maybe a user set timer as to how long spots stay on the band map window.
>
> Dick W7ZR
>
>
> Vacation or Retire Here
> It's Paradise on the Beach
> www.w7zr.com
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|