--part1_32.1cc287ec.2907ad9d_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
I am using WriteLog with the WX0B SO2R Box. I have LPT1 configured for CW and
LPT2 configured for my W9XT card. In the setup, if I set the CW PTT on, I
get CW on Pin 16 instead of PTT. I also get CW on Pin 17 where it should be.
If I configure for Break-in, then Pin 16 is disabled, but so is some of the
functionality of the SO2R Box. The computer is a commercial grade Pentium
III. Any ideas?
Tom, K5RC
--part1_32.1cc287ec.2907ad9d_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
<HTML><FONT FACE=arial,helvetica><FONT SIZE=2>I am using WriteLog with the
WX0B SO2R Box. I have LPT1 configured for CW and LPT2 configured for my W9XT
card. In the setup, if I set the CW PTT on, I get CW on Pin 16 instead of
PTT. I also get CW on Pin 17 where it should be. If I configure for Break-in,
then Pin 16 is disabled, but so is some of the functionality of the SO2R Box.
The computer is a commercial grade Pentium III. Any ideas?
<BR>
<BR>Tom, K5RC</FONT></HTML>
--part1_32.1cc287ec.2907ad9d_boundary--
|