--=====================_44638376==_.ALT
Content-Type: text/plain; charset="us-ascii"; format=flowed
At 21:57 10/6/2001, WA9ALS - John wrote:
> > > > In other words, if the program is running the DTR and DSR are
>asserted.
>
>Gil, you must be the only one on this side of the Milky Way with the
>"problem" you describe, but I noticed something in the HELP file that might
>pertain:
>
>"To prevent WriteLog from putting a PTT signal on RTS
>
>DisableCommPTT=YES"
That will not wrok. Of course I want COMM PTT to wrok. I tried it anyway.
To all I have rewired my cables and rest my other programs. I now use THE
SAME PROT for CW and PTT. It wroks, it is fine.
Ther reason I did not want to do this is becaseuse two dievices (RADIO and
RIGBLASTER) are now on the same calbe. It is not as convenient to break
down this way unless I amke up soem connectors to allwo eay separation. I
also had to reset all my other programs to use Prt 2 which is the one I now
use for both C and PTT.
My opinion which is obviously not shared is that CW and Other Modes are
independent and should allow you to use PTT as an independent PORT control
I CANNOT use the same port as the radio control since the Kenwood,
CORRECTLY I MIGHT ADD , requires that DTR be asserted or the radio control
won't work. Even if mine did not, others correctly by standards do.
If I seemed a bit pedantic and a bit of a complainer, I am sorry for those
ti offended. Often people get insulted or upset when a new user criticizes
a program that they have been using for a long time. It sort of becomes
like the flag. You are not allowed to say anything about it and even when
it is reasonable and correct. I understand that but I still feel I had a
right to make this observation and request.
Let us let this thread end now.
>This is an ini file option in the [Configuration] section.
Gil Baron http://members.home.com/gbaron
W0MN 44.08208 N 92.51263 W 1055'
"Baila como nadie te ve"
--=====================_44638376==_.ALT
Content-Type: text/html; charset="us-ascii"
<html>
At 21:57 10/6/2001, WA9ALS - John wrote:<br>
<blockquote type=cite class=cite cite>> > > In other words, if
the program is running the DTR and DSR are<br>
asserted.<br><br>
Gil, you must be the only one on this side of the Milky Way with
the<br>
"problem" you describe, but I noticed something in the HELP
file that might<br>
pertain:<br><br>
"To prevent WriteLog from putting a PTT signal on RTS<br><br>
DisableCommPTT=YES"</blockquote><br><br>
That will not wrok. Of course I want COMM PTT to wrok. I tried it
anyway.<br><br>
To all I have rewired my cables and rest my other programs. I now use THE
SAME PROT for CW and PTT. It wroks, it is fine.<br><br>
Ther reason I did not want to do this is becaseuse two dievices (RADIO
and RIGBLASTER) are now on the same calbe. It is not as convenient
to break down this way unless I amke up soem connectors to allwo eay
separation. I also had to reset all my other programs to use Prt 2
which is the one I now use for both C and PTT.<br><br>
My opinion which is obviously not shared is that CW and Other Modes are
independent and should allow you to use PTT as an independent PORT
control<br><br>
I CANNOT use the same port as the radio control since the Kenwood,
CORRECTLY I MIGHT ADD , requires that DTR be asserted or the radio
control won't work. Even if mine did not, others correctly by standards
do.<br><br>
If I seemed a bit pedantic and a bit of a complainer, I am sorry for
those ti offended. Often people get insulted or upset when a new
user criticizes a program that they have been using for a long time. It
sort of becomes like the flag. You are not allowed to say anything about
it and even when it is reasonable and correct. I understand that but I
still feel I had a right to make this observation and request.<br><br>
Let us let this thread end now.<br><br>
<br><br>
<blockquote type=cite class=cite cite>This is an ini file option in the
[Configuration] section.</blockquote>
<x-sigsep><p></x-sigsep>
<font face="Courier New, Courier">Gil Baron
<a href="http://members.home.com/gbaron";
eudora="autourl">http://members.home.com/gbaron</a><br>
W0MN 44.08208 N 92.51263 W 1055'<br>
"Baila como nadie te ve" <br>
</font></html>
--=====================_44638376==_.ALT--
|