On page 5 of the MMTTY Plug-in setup on my web page
I incorrectly stated that the COM port used for FSK was to be
set under the TX tab in the MMTTY setup screen.
This is incorrect. In fact, there is no COM port selection in
the TX tab. The COM port must be selected with Rttyrite by
going to the Ports pull-down menu and selecting the correct port.
I want to thank Vern, W9HLY, for pointing this out to me tonight.
I apologize for the mistake and have corrected the text on Page 5
concerning FSK setup. This applies only to FSK, not AFSK.
http://www.geocities.com/writelog
73, Don
http://www.aa5au.com
|