Answer to Question 1. The 10 buttons are shown because MMTTY comes with 5
default
profiles:
P1 = Standard RTTY
P2 = Fluttered signals
P3 = Fluttered signals (FIR)
P4 = Multi-path
P8 = 23Hz RTTY (MMTTY)
P5, P6, P7 & P9 are not defined (there are 9 available). If you defined
all nine, then you would have 18 profile buttons! You definitely don't
need 9 profiles for RTTY contesting and you don't need 23HZ RTTY!
Personally, I am only using two profiles (P1 & P2). I deleted the others
and only have 4 profile buttons on my screen (one for CQ, one for S&P,
for each profile).
This is all explained on the MMTTY plug-in pages www.geocities.com/writelog
Answered to Question 2. No, you can't change the name of the profile
buttons. If you have more than, say 2 profiles, you will either have to
memorize what you have or make a cheat sheet. Make it simple.
Perhaps Jorgen will allow in the future, to be able to show only those profile
buttons we wish to use while actually keeping the other profiles in tack. hint
hint
73, Don AA5AU
----- Original Message -----
From: "WA9ALS - John" <wa9als@starband.net>
To: <Writelog@contesting.com>
Sent: Tuesday, September 25, 2001 9:21 PM
Subject: [WriteLog] Setting MMTTY profiles buttons
> 1. How do you program the profiles BUTTONS along the bottom of the plug-in?
> I know how to set up a profile with the stand-alone, but I don't know how to
> relate that to the buttons in the plug-in. Also, there are 10 buttons, but
> I thought the HELP file said you could only set up 8 or 9 profiles.
>
> 2. Can I change the name shown on each button to what I want?
>
> Thanks!
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
|