Hello again,
This is great!!!!!!!!!!
Problem solved...... And so fast!!!!!!!!!!!
And I did read somewhere about these overlapping windows, but
it never registered............ (really feel stupid now)..
Thanks to all who replied!!!!!!!
73,
Herman
PA3BFH
*********** REPLY SEPARATOR ***********
On 23-09-01 at 8:41 Don Hill AA5AU wrote:
>Herman et al,
>
>First of all, yes, the Entry Window must be active in order to send
>via F2-F11. In RTTY contesting, the Entry Window should be active
>most, if not all the time.
>
>Your Rttyrite window may be overlapping your main WriteLog window.
>Reduce the size of both windows and place them on your screen so
>they do not overlap.
>
>Same thing for MMTTY...
>
>As far as your MMTTY problem, is it possible that your MMTTY
>display is sitting on top of your Rttyrite window? If so, then it will
>disappear when you click on a callsign in the Rttyrite window. You
>must move the MMTTY RTTY Control panel so that it does not overlap
>any other WriteLog window OR go to the TU Type pull-down menu
>and select TNC Setup. When the Rttyrite MMTTY Settings window
>appear, check off the box that says "RTTY Control is always on top".
>
>For more detailed information, check http://www.geocities.com/writelog
>
>73, Don AA5AU
>
>----- Original Message -----
|