>From the evidence I have, Yaesu must have built two different rigs
and stamped "FT-890" on the front. I never see the rigs that WL
supports, so I suppose its possible a volunteer tester reported one thing
and did another. At this point that is no way I can "correct the
problem" unless all the FT-890 owners out there get together and say
that the existing FT-890 setting in WL doesn't work. (Hint: the
two that have complained today do not constitute "all FT-890 owners").
Wayne, W5XD
> -----Original Message-----
> From: writelog-admin@contesting.com
> [mailto:writelog-admin@contesting.com]On Behalf Of Georgek5kg@aol.com
> Sent: Monday, September 03, 2001 15:07
> To: RobertCarpenter@tir.com
> Cc: writelog@contesting.com
> Subject: Re: [WriteLog] Rig Control FT-890
>
>
> Robert,
>
> Yes, when using an FT890 with WL, you must select FT900 as
> the radio in WL. I could never get proper radio control by
> selecting FT890.
>
> It took me quite a while to discover this special feature of
> WL!!! I know that the bug has been there for quite a while.
> I do not know if later verisons of WL have corrected the
> problem, but if not, it should be.
>
> 73, George, K5KG
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|