Darrell,
Take a look in the help file under "ini file" and "[PORTS]".
The entry you need is:
CommSlot1=7
This will set the first line of the Setup/Ports dialog box to point at COM7:
rather than COM1:.
Keith Regli WB6BIG
http://www.kregli.com/wb6big.htm
mailto:keith@kregli.com
> -----Original Message-----
> From: owner-writelog@contesting.com
> [mailto:owner-writelog@contesting.com]On Behalf Of Darrell Earnshaw
> Sent: Thursday, July 19, 2001 11:14 AM
> To: Writelog
> Subject: [WriteLog] Using COM7 with Version 10.26B?
>
>
>
> Hi,
>
> I've just read the release notes for versions 10.25/10.26 on the web
> site, and they indicate that COM1-15 are now supported. (My radio is on
> COM7, so this is of interest to me.) However, when I go to the "Ports.."
> setting, I only see COM1-4 listed, and no obvious mechanism for
> reassigning different COM ports to the radios. The version that I'm
> running is 10.26B, bought at Dayton this year.
>
> So, am I missing some obvious step in the process of assigning COM ports
> to radios?
>
> Thanks in advance,
>
> 73,
>
> Darrell
>
> NR3Y.
>
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|