1. S&P: I hit F4 to send %D and my callsign twice. The CQing station
calls me with the exchange. I hit F5 which send my TU and exchange. Then
when I see him QSL I hit RETURN which -only- logs the QSO.
Since F4 and F5 are next to each other, but separated by a little extra
space on most keyboards, it's easy to find the appropriate keys in a hurry.
2. RUN: A station answers my CQ. I hit the "+" key on the keypad to send
his exchange. He sends his exchange to me. I hit ENTER to send TU
QRZ -and- log the QSO.
It seems to me that it couldn't get much easier? 73
----- Original Message -----
From: "Nick Lekic" <va3na@rac.ca>
To: <clive@gw3njw.fsworld.co.uk>
Cc: <writelog@contesting.com>
Sent: Sunday, July 08, 2001 7:56 AM
Subject: Re: [WriteLog] Start sending now?
>
> Hi Clive:
>
> In response to item # 3 from your email, I had the same problem by
> working in S&P mode and still using "Enter sends exchange/QRZ". I
> found out that if you press and hold "shift" and then hit "enter" key
> you can log your QSO without sending "tnx , qrz test de" on the
> frequency which is not yours. It will just silently log the qso. I
> wish there is a keyboard shortcut for enabling/disabling "Enter sends
> exchange/QRZ". It is a real pain to use touch pad as a mouse to work
> with the menus and at the same time take the focus off of the entry
> window. On the other side "Enter sends exchange/QRZ" is great for
> running mode.
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|