WriteLog
[Top] [All Lists]

[WriteLog] Setup for Avery 5160 labels

To: <writelog@contesting.com>
Subject: [WriteLog] Setup for Avery 5160 labels
From: rhodes@evertek.net (Jim Rhodes)
Date: Tue, 17 Apr 2001 14:28:08 -0500
I use the the 8160 (inkjet version of 5160), all I did was copy the stock 
5160 label to the custom1 setting and change the "Horz. pitch" 2.800 
inches. Seems to work OK.


At 13:45 04/17/2001, you wrote:

>On Mon, 15 Jan 2001 14:36:21 -0500, I asked:
>
> >Does anyone have a setup for Avery 5160 QSL labels for Writelog?  I changed
> >the defaults to 3 across, 10 down but the three across were pretty squished
> >together.
>
>Guess I never got back to the reflector on this.  Here are the two
>responses I received.  I have not tried either of them, it was only for
>one callsign and decided to do the job by hand.  Maybe next time.
>
>73 - Jim AD1C
>
>From: John Ragsdale <jr91901@navix.net>
>Subject: Re: [WriteLog] Setup for Avery 5160 labels
To: <writelog@contesting.com>
>Date: Mon, 15 Jan 2001 17:58:41 -0600
>
>Hi Jim,
>
>Try this:
>
>All in millimeters:
>
>Left edge of left label to last label across   140
>Top edge of top label to bottom label top      228
>Distance from left edge to left edge of label  5
>Distance from top edge to top edge of label    13
>
>73
>
>John NØNF (ex NØOFR)
>
>
To: <writelog@contesting.com>
>Date: Mon, 15 Jan 2001 18:43:13 -0600
>From: Marty Tippin <martyt@pobox.com>
>Subject: Re: [WriteLog] Setup for Avery 5160 labels
>
>This worked for me, using 5160 labels:
>
>On the QSL Printing Setup dialog (File | QSL Page Setup...) :
>
>Number Across: 3
>Number Down: 10
>
>Number to skip: 0
>
>Left edge to left edge: 141
>Top edge to top edge: 230
>
>Distance from left edge: 4
>Distance from top edge: 13
>
>
>Printed nice looking labels - be careful of the font size or you'll run
>off
>the right edge of the page. You could also probably change the
>"distance
>from left edge" to 0 or so and still fit the labels nicely (there is
>apparently an additional offset generated by WriteLog.)
>
>-Marty NW0L
>   martyt@pobox.com
>
>
>--
>Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
>USA +978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.com
>
>
>
>--
>WWW:                      http://www.writelog.com/
>Submissions:              writelog@contesting.com
>Administrative requests:  writelog-REQUEST@contesting.com
>Problems:                 owner-writelog@contesting.com

Jim Rhodes K0XU
rhodes@evertek.net
jim@rhodesend.net


--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com


<Prev in Thread] Current Thread [Next in Thread>