Lie to the radio - tell it that you have installed a SSB filter instead.
Then it will use it in SSB mode, and will jigger the offset around as if it
were that SSB filter. You will need to play with your PBT controls to get
everything tuned to where you want it afterward.
Been there, done that (with a 756)
Jerry W4UK
At 08:01 PM 3/16/01 -0600, you wrote:
>
>I remember a while back discussion regarding the situation where on the Icom
>746 someone was able to fool / trick the radio to use the narrow 500 Hz
>filters when in SSB mode. I have the filters installed and they work great
>with the rig set to CW or RTTY but when I switch to SSB for Writelog and
>RTTY via the sound card, the radio defaults to the wide filter and will not
>allow selection of the narrow filter.
>
>Someone remember the solution?
>
>I look forward to any help.
>
>Thanks, Kim N9SDL
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|