Hi Major Ron,
If you buy a cable from MFJ, make sure you buzz it out before you use it. I
know someone who spent an evening to find out the 13 pin din was not
soldered correctly...
If you just want the 13 pin plug, DigiKey stocks it P/N
CP-1013-ND(www.digikey.com)
Hope that helps...
73
Joe KB9SIZ
----- Original Message -----
From: deuxfox <deuxfox@earthlink.net>
To: Major Ron <majrabsr@rconnect.com>
Cc: <writelog@contesting.com>
Sent: Tuesday, March 06, 2001 8:25 PM
Subject: Re: [WriteLog] KW 13pin ACC-2 plug
>
> Ron,
> MFJ carries them made up with leads connected. The model I got is MFJ
> 5213. Cost was minimal considering the soldering you don't have to do. I
> called them and discussed it with one of the technical staff but don't
> have their number handy here.
>
> Don KF2XF
>
> Major Ron wrote:
> >
> > Hi All,
> >
> > Does anyone know where I can obtain one of these plugs? I cannot find
anyone
> > who handles them.
> >
> > TIA & 73,
> > Ron, KA9ALC
> >
> > --
> > WWW: http://www.writelog.com/
> > Submissions: writelog@contesting.com
> > Administrative requests: writelog-REQUEST@contesting.com
> > Problems: owner-writelog@contesting.com
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|