Bob,
I've experienced this with a number of different programs. Try changing the
baud rate to something slower. I'm running a KPC-3 at 9600 for packet and a
KAM Plus at 9600 for RTTY with no problems. I was having problems at higher
baud rates.
GL es 73 de Tom, K4NR
----- Original Message -----
From: R. L. Carroll <rlcarroll@rcn.com>
To: <writelog@contesting.com>
Sent: Saturday, December 30, 2000 2:04 PM
Subject: [WriteLog] KAMPLUS and dropped chararacters in RTTY
> I am using two KAMPLUS TNCs for two RTTY stations. For some reason when I
> type a transmit string in the type ahead buffer and then look in the RTTY
> window to see what has been locally echoed I discover that about 1 in 20
> characters has been dropped. These may be near the beginning of the
string
> or later on. Folks on the receiving end verify the characters are missing
> over the air as well. In general the "drops" are not adjacent. Has
anyone
> else experienced this and cured it?
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|