John,
I have both an FT-990 and FT-1000D I use with WL. Both are
connected the same way. To key the radio, there are two basic
options:
1. Push in the VOX button on the radio. This will let you use it in
semi-break-in mode on CW and VOX on SSB, and you don't need
a PTT connection.
2. Go into WL Setup|Ports and activate PTT keying and choose
your port. Hook this up to one of the several inputs on the back of
the radio that close the PTT.
Personally, I use method 1. For RTTY, I do use the PTT line.
73 Barry W2UP
> ----- Original Message -----
> From: "John Scott" <kk5vh@austin.rr.com>
> To: <writelog@contesting.com>
> Sent: Thursday, December 14, 2000 10:37
> Subject: [WriteLog] Radio Setup FT990
>
>
> >
> > Hi guys,
> >
> > Been watching the reflector for some time and the advice looks
> > great. Now for me..
> >
> > I have an FT990 connected via serial port (COM1:) and the software
> > scans the radio and all track nicely.
> >
> > I cannot seem to get the software to transmit via the radio.
> > Pressing F keys does not make any difference and I cannot seem to
> > find the answer in the manual.
> >
> > I would like to send both SSB and CW via the keyboard.
> > Can the software key the radio via a serial command fast enough to
> > provide CW?? I have recorded wav files for all letters and numbers
> > and put them in wave file area but I am not sure yet how to get the
> > software to use them. If I hit F2 to broadcast a message that I have
> > recorded, the radio key to the transmit mode and I get no modulation
> > or end. How I stop the system from transmitting is to hit the esc
> > key.
> >
> > Any help out there??
> >
> > Thanks
> >
> > John KK5VH
> >
> >
> > --
> > WWW: http://www.writelog.com/
> > Submissions: writelog@contesting.com
> > Administrative requests: writelog-REQUEST@contesting.com
> > Problems: owner-writelog@contesting.com
> >
> >
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
--
Barry Kutner, W2UP Internet: w2up@mindspring.com
Newtown, PA FRC alternate: barry@w2up.wells.com
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|