----- Original Message -----
From: "W. Wright, W5XD" <w5xd@writelog.com>
To: "'Marty Tippin'" <martyt@pobox.com>; "'WA9ALS - John'"
<jfleming@shelbynet.net>; <writelog@contesting.com>
Sent: Monday, December 04, 2000 11:41 PM
Subject: RE: [WriteLog] Pse help get windows back
>
> Marty's suggestion probably won't work in version 10.
> In version 10, WL saves the window positions in the .WL file.
> You can tell it to NOT recover those positions by holding
> down the CTRL key while it opens the file. This applies
> whether you use the Browse dialog box, or the most-recently-used
> list.
>
> Wayne, W5XD
>
Using the CTRL key like Wayne suggested solved the problem - THANKS!
The first time I tried it, all the windows appeared like they should -
none missing like before. Then I exited without saving the log. Sure
enough, next time I brought that log up, the certain windows were
missing and "not-gettable" as before. Quit, started over again holding
down the control key, then SAVED the log, and now when reopened, the
windows are fine.
Apparently there's some "junk" accumulating in the ini file that has no
meaning anymore...? Like the v9.x registration code and maybe some of
these window settings...
Thanks to all that responded! 73
> -----Original Message-----
> From: owner-writelog@contesting.com
> [mailto:owner-writelog@contesting.com]On Behalf Of Marty Tippin
> Sent: Tuesday, December 05, 2000 02:32
> To: WA9ALS - John; writelog@contesting.com
> Subject: Re: [WriteLog] Pse help get windows back
>
>
>
> I should mention that this will most likely reset all windows to a
> "default" size and location - and if it doesn't look like it worked
> correctly or if things go haywire, delete the writelog.ini that you
> modified and rename your copy of writelog.ini back to writelog.ini
>
> You might also look at the [DockScreen-Summary] section and see if the
> "ScreenCX" and "ScreenCY" are set to values that match the width and
height
> of your monitor settings.
>
> -Marty NW0L
>
>
> At 08:27 PM 12/4/00 -0600, Marty Tippin wrote:
>
> >This is fairly drastic but should fix the problem:
> >
> >1. Make a copy of C:\windows\writelog.ini
> >2. Open C:\WINDOWS\writelog.ini and remove every section that has
> >"[DockScreen-Barxx]" at the beginning of it (where xx is a number as
in
> >"[DockScreen-Bar26]") - by "section" I mean the line that has the
square
> >brackets around it and all lines below that up to but not including
the
> >next line that has square brackets around it. Also remove any lines
that
> >start "X=" "Y=" "W=" and "H=" in other sections - you'll see
those in
> >the TUWIN and RTTYRITE sections. That should reset all the window
> >positions to the default location.
> >
> >-Marty NW0L
> > martyt@pobox.com
> >
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|