Hi Jon,
I'm using TS-950-SDX and WL too. It appeared the same thing in the CQWW
RTTY. I have PTT and FSK keying circuit on PC port Com2 using
pair of 4n25. Reverse mode installed on TS950 menu and FSK - rev on TU type
on WL. All is working OK.
73! Igor UA2FZ
----- Èñõîäíîå ñîîáùåíèå -----
Îò: Jon Suehiro <nn5t@attglobal.net>
Êîìó: <writelog@contesting.com>
Îòïðàâëåíî: November 06, 2000 7:45 PM
Òåìà: [WriteLog] WriteLog-TS950SDX-FSK almost there but ...
>
>
> I made FSK keying circuit with a photo coupler using com port TXD and GND
> connection.
>
> I don't know how TS850 and TS870 are, but originally Kenwood FSK keying
has
> been in backward compare to Yaesu/Icom.
>
> With Tele-reader, I can individually select normal/reverse on TX and RX.
>
> When I was using KAM, I can reverse the FSK keying polarity on one of KAM
> command (FSK rev: On).
>
> TS950 FSK reverse on Menu does not work because it reverses not only TX
but
> RX also.
>
> The TU type on Rittyrite - TNC setup nor FSK-Norm/FSK-Rev doesn't work
> either by the same reason (I just need to reverse the keying polarity on
TX
> only).
>
> Let me know if there is any trick to it. Or do I need to add another
> transistor in the keying circuit to reverse the polarity electrically in
> hard way ?
>
> How are you doing, Kenwood RTTY contester with WL ?
>
> Jon, nn5t@arrl.net
>
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|