Hi Chris, please try the following:
If
WriteLog will not communicate with your PK-232, it may be necessary to do the
editing described below.
Using NotePad edit C:\Windows\writelog.ini as follows:
In the file, go to the section labeled [Ports].
Look at the line for the Com port you intend to use. It will look
like this:
COM1:=9600,n,8,1,x
Check to be sure all parameters are correct, then Delete the final x
(but not
the comma). It should look like this:
COM1:=9600,n,8,1,
Click on File, Save. Then open WriteLog; this should allow
your PK-232 to communicate with WriteLog.
For other tips on using the PK-232, goto http://www.qsl.net/k0bx
Hope this helps
Joe K0BX
On Fri, 22 September 2000, David Martin wrote:
>
>
> Hi all,
> Anyone using a PK-232 that can help me? For some reason WL won't talk
> to it, but it passes the "Initializing Host Mode" test fine. Logger
> works great with it. Any ideas why? What do I need to setup? Any
> help is appreciated!
> Thanks
> -Chris KL9A
> kl9a@qsl.net
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
k0bx@qsl.net
http://www.qsl.net/k0bx
_______________________________________________________________________
Free Unlimited Internet Access! Try it now!
http://www.zdnet.com/downloads/altavista/index.html
_______________________________________________________________________
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|