Hi Roy:
I am assuming that you have the same setup that I have and I was having the
same problem. Don, AA5AU helped me get on the right track. First of all
load your rtty messages from the SARTG contest, because the exchanges and
scoring are the same. Then do the following:
1. Make sure the mode in rtty window is BPSK
2 Make sure TU Type is set to "sound board AFSK"
3. Make sure that your radio is in LSB mode, you cannot use it in USB mode
in PSK mode for everything to work right in Writelog.
4. Go to the BANDS menu in the main Writelog window and select LSB is
really FSK.
Once you do these things your functions keys will now send the same messages
as in the SARTG contest.
Hope this helps
Lloyd
Lloyd S. Smith
ARS NX4W
Formerly: N1OAZ
Email: nx4w@bellsouth.net or nx4w@arrl.net
Web Page: http://personal.bellsouth.net/~nx4w
----- Original Message -----
From: "Roy Maull" <rmaull@citynet.net>
To: <Writelog@contesting.com>
Sent: Friday, September 01, 2000 1:09 PM
Subject: [WriteLog] OK, I give up!!!
>
>
> Hey fellow Writelog Gurus,
>
> How in the world do you go about connecting the function keys to the PSK
> output. Setting the SSB messages to those like RTTY doesn't work. Nor
> does creating files and adding them in the Type Ahead window.
> So, how does one go about using the power of the CW/RTTY/SSB messages with
> PSK????
>
>
>
> 73.. Roy N8YYS
> Keep West Virginia beautiful.. Grow ALUMINUM!!
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|