The external W5XD+ keyer provides two 25-pin pseudo-LPT
connectors which include PTT for each radio. You'll need the
normal transistor/resistor interface. This is one of the advantages
of the keyer as on NT/2000 systems, you cannot use the normal
LPT interface.
73,
Mike WA0SXV
----- Original Message -----
From: "Gerard Jendraszkiewicz" <jend@midway.uchicago.edu>
To: "WriteLog Reflector" <Writelog@contesting.com>
Sent: Monday, August 14, 2000 13:06
Subject: [WriteLog] Keyer question ?
>
> Hello Again,
>
> Does anyone know if the external multifunction keyer keys the PTT
> line when in use ? I had to have the VOX on to get it to work properly.
> I would think using an external paddle it could key the rig ?? I am
> using WL to key the radio via the serial port. Having the radio in the
> VOX mode defeats the purpose of keying via serial port. Any help
> appreciated.
>
> Thanks, Jerry, KE9I
>
> jend@midway.uchicago.edu
>
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|