Hi Robert
ALT W clear all the field in the QSO Entry... But CURSOR must be on there.
To try a transmition put the cursor on QSO ENTRY just under the CALL butom .
Them clic ALT K .
TX should be keyed.
I think you have the PTT line and all other things correctly selected and
wired.
About garbled words with no signal in the receiver it can be noise from
Sound blaster or a bad shield cable or too much
audio level at the PC Audio control...
Robert give look in the HELP.. It is very good.
Hope this can help you a litle.
73
Jose Albuquerque
ct1aoz@netzero.pt
ICQ: 4334073
PLS QSL VIA '' eQSL.cc ''
----- Original Message -----
From: Robert W. Wood <woodr@usd.edu>
To: <Writelog@contesting.com>
Sent: 13 August 2000 20:34
Subject: [WriteLog] Need Some Help
>
> Dear Writelog Group
>
> Just received Writelog and installed it. Want to use it on rtty and
> psk. Presently I am using a RIGblaster and Digipan on psk and it works
> beautifully.
>
> However, have heard so many excellent comments about Writelog that I
> wanted to use it.
>
> Installed it in my Gateway computer, thought I did everything right ,but
> it just doesn't seem to work. In rtty I get lots of letters appearing
> all the time. Can't even clear that out with alt w. Can't transmit
> either. I wonder if anyone could help me out with some simple
> instructions/checks. I know I haven't set something right but have
> tried everything that I could think of or read.
>
> Once again, I can get on psk with my RIGblaster and Digipan but want to
> use Writelog for rtty and psk.
>
> Bob, W0UD
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|