Hi All,
Writelog 10.18 ( latest ) does in fact have CW and PTT on the COM port.
I modified my CT-17 for the IC-756's here and works great.
Haven't used the rig blaster, but the WL COM stuff is there.
73, Ric KV1W
----- Original Message -----
From: Robert Doherty <k1vv@tmlp.com>
To: Antony J. Heatwole <aheatwole@hns.com>
Cc: <writelog@contesting.com>; <k1uhf@westmountainradio.com>
Sent: Wednesday, August 09, 2000 22:35
Subject: Re: [WriteLog] Using RIGblaster with WriteLog?
>
> Tony,
> There was a posting from WL a while ago ....that they were going add rig
> control from a COM port so it could be used with the RigBlaster ... it
> certainly would make it a great combination ...WriteLog/RigBlaster
> ....it could become the setup of choice for the contesters ...for SSB
> and CW .... also RTTY ... PSK31.... etc.....
>
> but we have not seen anything from WriteLog as yet ....
> K1VV
>
> "Antony J. Heatwole" wrote:
>
> > I've taken a look at the RIGblaster web page, and it seems that
> > RIGblaster can only control PTT from a serial port output.
> > I've only been able to get WriteLog to control SSB PTT using a
> > parallel port output. The WriteLog manual describes using
> > a serial port only for CW PTT control. Is there any way to use
> > RIGblaster with WriteLog for SSB?
> >
> > Thanks.
> >
> > 73, Tony Heatwole, N3FX
> >
> > --
> > WWW: http://www.writelog.com/
> > Submissions: writelog@contesting.com
> > Administrative requests: writelog-REQUEST@contesting.com
> > Problems: owner-writelog@contesting.com
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|