Bill - From the ini options section of the HELP file:
Set AutoSaveCount to the number of QSOs allowed between automatically
saving the log. Set this to -1 and WriteLog will not autosave. If you
make no entry here, WriteLog will auto-save after every 100 QSOs.
AutoSaveCount= -1
-------------------------
Here's another little tidbit that I came across that was recently
discussed on the relfector:
Set this one to YES (MUST be all capital letters) to run CT function
keys
CtCompatibleAccel=NO
**Note the "must be in all capital letters"! ;-)
WA9ALS - John jfleming@shelbynet.net
http://www.qsl.net/wa9als (now with Shack Cam!)
----- Original Message -----
From: "Bill Heinzinger" <w9ol@dataflo.net>
To: <writelog@contesting.com>
Sent: Monday, May 29, 2000 8:36 PM
Subject: Re: [WriteLog] automatic save & unwanted cluster spots
>
> > > I know it's in the manual but I can't seem to get it right.
> > >
> > > I DO NOT want to see that red print message that says;
> > > "20 qso's since last save"
> > > I want it to save automatically WITHOUT the reminder.
> >
> > You have to edit writelog.ini and look for Autosave under
[configuration].
> > Mine's set at 20 since entering a number above 20 still shows the
"20
> > qso's..." warning but autosaves once the desired number is reached.
Weird
> > huh?
> Can someone please give me the proper syntax as I don't have anything
that
> says
> Autosave in [configuration] or any other section.
>
> Thanks
>
>
>
> --
> WWW: http://www.contesting.com/writelog
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
--
WWW: http://www.contesting.com/writelog
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|