WriteLog
[Top] [All Lists]

Packet view - no answer

To: <writelog@contesting.com>
Subject: Packet view - no answer
From: jpixton@shentel.net (Jerry Pixton)
Date: Thu, 24 Dec 1998 14:07:03 +0000
I may have missed a response to this message while I was on the road.

Did any one answer as to how to connect to my dx cluster - I have not tried 
this in 9.20 yet. I have about repaired my hard disk failure and am ready to 
install 9.20 upgrade.

Jerry


>Return-Path: <jpixton@shentel.net>
>X-Sender: jpixton@pop.shentel.net
To: <writelog@contesting.com>
>Date: Wed, 25 Nov 1998 14:35:45 +0000
>To: rttywrite@larry.wu3v.net
>From: Jerry Pixton <jpixton@shentel.net>
>Subject: Packet view
>
>This interesting thread on the Kam plus caused me to try out the packet
>spot mode with the Kam Plus (which is a dual port tnc). I did get text in
>the packet view window but I see no way to transmit - that is to connect to
>my dx cluster so I only get one set of spots. AltK does not seem to bring
>up a transmit window as it does in RTTY or CW. What am I missing?????
>
>Jerry, W6IHG
>
>------------------------------------------
>Dr. Jerry R. Pixton, PIXOS Designs
>http://www.pixos.com/designs/
>jpixton@shentel.net
>------------------------------------------
>
>
------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs
http://www.pixos.com/designs/
jpixton@shentel.net
------------------------------------------
<Prev in Thread] Current Thread [Next in Thread>
  • Packet view - no answer, Jerry Pixton <=