VHFcontesting
[Top] [All Lists]

[VHFcontesting] For Sale: Custom Rover/EmComm/Field Day Enclosed Trailer

To: "NEWSVHF@mailman.qth.net" <NEWSVHF@mailman.qth.net>, "packrats@mailman.qth.net" <packrats@mailman.qth.net>, "vhfcontesting@contesting.com" <vhfcontesting@contesting.com>
Subject: [VHFcontesting] For Sale: Custom Rover/EmComm/Field Day Enclosed Trailer Tower
From: JOHN SWINIARSKI <k1or@comcast.net>
Date: Mon, 10 Apr 2023 12:36:57 -0400 (EDT)
List-post: <mailto:vhfcontesting@contesting.com>
Hi all,

For Sale just in time for portable operation season is my custom rover trailer 
and heavy-duty military grade telescoping mast. Originally built in 2010 for 
serious VHF/UHF/uW roving on 6 through 24GHz. Trailer was completely 
refurbished in 2021 in advance of the highly successful FFMA Grid Expedition by 
N4EME in June 2021 to Maine grids FN57 and FN66.

The trailer is based upon a 6x12 landscape trailer with leveling jacks 
incorporated. On that sits the 10 meter telescoping mast weighing 350 lbs and 
the steel framed, aluminum sided 6’x6’ operating enclosure.  I have no 
specifications on the mast other than is it extremely heavy and rugged. The 
sections are constructed of stainless steel tube and are raised by a large acme 
screw within the mast. The screw is driven by a chain and sprocket assembly at 
the base of the mast which is turned by a ¾ hp 120V motor. The operating 
enclosure incorporates a 6’ operating desk, 4 Heliax bulkhead feedthus, 220V 
and 120V power interfaces and distribution, Ethernet and additional RF 
feedthrus. There is a rugged 2”x2” mounting point welded to the enclosure frame 
on the roof top for additional antenna etc.

The overhaul in 2021 consisted of inspection and greasing of axle bearings, new 
tires, butyl taped seams and new rubberized roof coating, resealing of aluminum 
siding joints, refinished floor with marine grade epoxy paint. Telescoping mast 
drive screw was greased and new rotor mount fabricated and installed. All 
trailer lighting was inspected and operational. The trailer performed 
flawlessly on the FN57/66 2021 trip. Less than 1000 miles were put on it during 
that trip.  It has been kept under a tarp for most of the time since.

Included in the sale is the trailer, mast and mountings, and the enclosure with 
interfaces as described. In addition, a spare tire for the trailer, one 7/8” 
and one ½” Heliax feedlines are included. Not included are any antennas, 
rotors, communications equipment, ancillary equipment or tow vehicles shown in 
the pictures. I have in hand the title for the trailer. Trailer is located in 
Southern NH FN42ir

Link to Trailer photos: Rover trailer 
https://www.dropbox.com/sh/b7xb5sjql9x6kd4/AAB7Fq0uOv-Scd9UUmoSrlnIa?dl=0

Asking $6,250. This is a fraction of what it would take to recreate this today. 
Please PM me with any questions.

Thanks for looking.

73, John, K1OR

_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
<Prev in Thread] Current Thread [Next in Thread>
  • [VHFcontesting] For Sale: Custom Rover/EmComm/Field Day Enclosed Trailer Tower, JOHN SWINIARSKI <=