..all the larger original design M² antennas used solid 1/4" elements
swedged onto a short length of tubing at the center. Fine design.
-W9RM
Keith Morehouse
via MotoG
On Thu, Oct 1, 2020, 12:51 PM PAUL ROLLINSON <paulrollinson@sbcglobal.net>
wrote:
> Home brew? I don't know of any solid elements on 6M. They get heavy unless
> supported.
> It could use commercial mounting hardware.
> Are they insulated from the boom and held with push on retaining rings?
> That's the K1FO style yagi.
> Paul Rollinson, ke1liRollinson Associates860-928-5147860-208-8814 Cell/
> textPaulrollinson@sbcglobal.net Representing Component Part
> Manufacturers for over 35 years
>
> On Thursday, October 1, 2020, 02:48:12 PM EDT, mike repinski via
> VHFcontesting <vhfcontesting@contesting.com> wrote:
>
> A local has a 6 meter yagi for sale. 40 foot boom 9 elements that are 1/4
> inch solid rod. They go thru a insulated boom. Any ideas? Thanks Mike
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|