Unless I am doing something wrong, while in contest mode and MSK144, recent
WSJT-X versions do not let you setup CQ messages that announce a listening
frequency like:
CQ 265 K1ABC FN32
This is probably because the protocol does not allow a proper/longer
contest mode/split CQ like:
CQ TEST 265 K1ABC
I have tested a manual workaround that seems to work (6 meter example).
Check the box next to the "Tx CQ 260" spinner, set your VFO to desired
listening frequency (like 50.265) and* manually* change the TX6 message by
replacing "TEST" with the listening frequency:
CQ TEST K1ABC FN32 --> CQ 265 K1ABC FN32
With this workaround, auto sequence seems to properly handle radio
frequency and the contest mode exchange.
MSK can get crowded during contests. I encourage others to try working
split on 6 and 2 meters this weekend.
Hope to see some of you from N2NT.
- John N2NC
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|