Turns out I can't read. The display read .1mW, not 1mW. 20dB up from 0.1mW
is the expected 10mW. Whoops!
Sean
On Sat, Jun 29, 2019, 16:16 Sean Waite <waisean@gmail.com> wrote:
> Hi all,
>
> I have an older DEMI 10368-144. It isn't marked LP, but lacks the heat
> sinking I'd expect on the 1W models. I had assumed it was the low power
> model, but I measured 1mW through a 20dB attenuator. The LP model is rated
> at >10mW but 100mW is much much greater. Were the older models 100mW, or am
> I doing something wrong here?
>
> Thanks and 73,
> Sean WA1TE
>
On Sat, Jun 29, 2019, 16:16 Sean Waite <waisean@gmail.com> wrote:
> Hi all,
>
> I have an older DEMI 10368-144. It isn't marked LP, but lacks the heat
> sinking I'd expect on the 1W models. I had assumed it was the low power
> model, but I measured 1mW through a 20dB attenuator. The LP model is rated
> at >10mW but 100mW is much much greater. Were the older models 100mW, or am
> I doing something wrong here?
>
> Thanks and 73,
> Sean WA1TE
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|