Hi Jarred,
How do you handle sequencing just one of the transverters at a time? Do you
have a separate sequencer for each, do you key them all at once, or do you
switch each individual item in the chain? I'm thinking may end up with
multiple sequencers. This also gets rough if I want to sequence the PTT for
the IF radio for a sort of poor man's TX inhibit (I'd have to chain them or
something).
Just curious how others are doing things.
73,
Sean WA1TE
On Wed, Feb 14, 2018, 19:06 Jarred Jackson <Jarred.Jackson@hotmail.com>
wrote:
> Related to a previous thread on IF radios.
>
>
> In my rover setup, I use an FT-817 as an IF rig. I purchased an FT-817
> amplifier PTT cable from eBay and it works well. I chopped the RCA
> connector off of it and wired it up to a multi-position switch. For 4 of
> the transverters I have a W6PQL 4 event sequencer. The main output switches
> the relay, the next output turns on the amplifier, and the third enables
> the transverter. In this setup there is NO margin between keying the
> transverter and delivering RF power to the transverter. While there is a
> delay between PTT on the accessory plug and RF coming from the radio it is
> eaten up by the 3 events of the sequencer. If I ever decide to use LNAs, I
> will use the TX inhibit feature of the FT-817 as well. However everyone
> works great as-is so I have not wired up the inhibit circuit. I do not use
> a sequencer for the 222 amp (elecraft) as it does its own switching. If
> only using this transverter, the PTT cable would have plugged in directly
> to the RCA jack.
>
>
> My other IF radio is an FT-290R. I only use this with my 10GHz setup and
> there is no PTT line required for the Kuhne transverter as the radio puts
> voltage on the coax. The downside with that radio is that I have to squeeze
> the PTT on the microphone and then send CW using the key.
>
>
> I don't offer this as an ideal or even recommended solution, just to share
> what I do. I tried a footswitch in a much earlier version of my rover and
> abandoned this concept quickly as I could not get into the habit of
> pressing it.
>
>
> Jarred - KF2MR
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|