Hello to all VHFers.....I need to make up a long Bird Wattmeter cable
for use on a DXpedition. I want to put the pick-up body with the slug
here and about 10-12ft away, but the meter movement.
For that, I need to procure a couple of the (very) old microphone
connectors like were on the old Heathkit TWOER. It is a round coaxial
connector, about 5/8" across, with a singe center point where the center
of the cable was soldered and a shell with a spring on the back. I
found a bunch of these at a hamfest a few years ago, but I must have
used them all up. These are great for connecting to the DC port of Bird
Wattmeter bodies.
Alternatively, I could use a real Bird DC connector, but those are much
harder to find.
I really need to find one, but would take more if you have them. IF you
have one or two of the old microphone connectors that you could spare,
please contact me directly.
Thanks a lot....
73 Marshall K5QE
Phone is 409-787-3830 if you want to call....
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|