VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] [VHF] Yaesu FT991 upgrade

To: "Allen Oldfield" <aoldfiel@stny.rr.com>, VHFcontesting@contesting.com
Subject: Re: [VHFcontesting] [VHF] Yaesu FT991 upgrade
From: "Ron Klimas WZ1V" <wz1v@sbcglobal.net>
Reply-to: wz1v@sbcglobal.net
Date: Thu, 25 Aug 2016 06:19:12 -0400
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
Just designed and built a band decoder 
interface for my FT-991 to add that capability. 
4 band-dependent TX ground keying and 
4 control outputs for coax relays. Article 
forthcoming in September NEWS-Letter. 
-73 Ron WZ1V

----- Original Message -----
From: "Allen Oldfield" <aoldfiel@stny.rr.com>
To: <VHFcontesting@contesting.com>
Date: Wed, 24 Aug 2016 17:17:03 -0400
Subject: Re: [VHFcontesting] [VHF] Yaesu FT991 upgrade

> It's too bad Yaesu didn't decide to make the FT-991 more like the FT-847
> (and its predecessor) and include: 
> 
> a) Four separate outputs (one each for HF, 6M, 2M and 432MHz) and 
> 
> b) Four separate "keying" functions for each output
> 
>  
> 
> Adding those two features to the FT-991A would make it the ideal radio for
> me.  Including the ability to add a Panadapter to the would be.astounding.
> 
>  
> 
> 73,
> 
> Al - W9KXI
> 
> FN12ne
> 
>  
> 
> Date: Tue, 23 Aug 2016 23:58:41 -0400
> 
> From: Jim Worsham <w4kxy@bellsouth.net>
> 
> To: John Geiger <af5cc2@gmail.com>
> 
> Cc: yaesu reflector <yaesu@mailman.qth.net>,      VHF reflector
> 
>       <vhf@w6yx.stanford.edu>,    vhf contesting
> <vhfcontesting@contesting.com>
> 
> Subject: Re: [VHFcontesting] [VHF] Yaesu FT991 upgrade
> 
> Message-ID: <3B40D1D0-C7BD-4704-A9F2-F5BA15C9F5C7@bellsouth.net>
> 
> Content-Type: text/plain;   charset=us-ascii
> 
>  
> 
> Yeah, I looked at this at the Huntsville hamfest this past weekend.  Very
> nice.  I just wish there was a way to put that screen on a larger external
> monitor.  There is a lot of stuff on that small screen.
> 
>  
> 
> 73
> 
> Jim, W4KXY
> 
>  
> 
> Sent from my iPad
> 
>  
> 
> > On Aug 23, 2016, at 2:27 PM, John Geiger via VHF <vhf@w6yx.stanford.edu>
> wrote:
> 
> > 
> 
> > Yaesu has just upgraded the FT991 to the FT991A which features a real 
> 
> > time bandscope/waterfall-like on the Icom 756 series where the audio 
> 
> > is not muted while the bandscope is going.  So far I think it is the 
> 
> > only HF/VHF/UHF rig to have one. Certainly makes it more attractive in 
my
> mind.
> 
> > 
> 
> > See:  http://www.universal-radio.com/catalog/hamhf/4991.html
> 
> > 
> 
> > 73 John AF5CC
> 
> > _______________________________________________
> 
> > VHF mailing list
> 
> > VHF@w6yx.stanford.edu
> 
> > https://w6yx.stanford.edu/mailman/listinfo/vhf
> 
>  
> 
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
> 
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>