To: | "vhfcontesting@contesting.com" <vhfcontesting@contesting.com> |
---|---|
Subject: | [VHFcontesting] TE systems 28 volt amps for roving / portable use |
From: | Mark Spencer <mark@alignedsolutions.com> |
Date: | Sat, 15 Aug 2015 12:52:35 -0700 |
List-post: | <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com> |
Hi, I'd be curious in hearing comments about the 28 Volt TE systems amps, especially from any one who has used them in a roving / portable setup and has run them from a battery system vs a 28 volt power supply. I'm looking at their 28 volt 144 MHz and 50 MHz amps. They seem like a reasonable way to get 600 watts, if they will work properly at voltages of less than 28 volts (ie. from a typical battery system.) If I need to run them from 28 VDC power supply then they would be much less useful to me. Thanks in advance for any comments. All the best. Mark Spencer VE7AFZ Sent from my iPad _______________________________________________ VHFcontesting mailing list VHFcontesting@contesting.com http://lists.contesting.com/mailman/listinfo/vhfcontesting |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [VHFcontesting] Solar Power guru...., Marshall-K5QE |
---|---|
Next by Date: | [VHFcontesting] Seeking input of RF Matrix board for Flex and other, Phil Theis |
Previous by Thread: | [VHFcontesting] Solar Power guru...., Marshall-K5QE |
Next by Thread: | [VHFcontesting] Seeking input of RF Matrix board for Flex and other, Phil Theis |
Indexes: | [Date] [Thread] [Top] [All Lists] |