Pete,
I believe the 897 has a similar issue. Someone wrote a QST article many
years ago about tapping into the front panel mic connector to get CAT when
the back connector is set for use by the tuner, but I cannot find it
anymore. Instead of implementing that idea I just used an external LDG tuner
that did not need to be controlled by the radio.
I had pulled that article from the QST archives, so try searching there or
ask on the 897 Yahoo group, and there may be an 847 group too.
73
Chet, N8RA
-----Original Message-----
From: VHFcontesting [mailto:vhfcontesting-bounces@contesting.com] On Behalf
Of peter h via VHFcontesting
Sent: Wednesday, January 28, 2015 9:29 AM
To: PNWVHFS@googlegroups.com; vhfcontesting@contesting.com;
vhf@w6yx.stanford.edu; CVARCDiscussion@yahoogroups.com
Cc: n7wlc@yahoo.com
Subject: [VHFcontesting] FT-847 CAT/Antenna Tuner Question
A friend recently obtained a Yaesu FT-847 to add 6/2/70 to his stable of
equipment. (For the first time, he can now access the weak signal VHF
bands!)
The operating manual states that a user can do C.A.T. with the radio, which
he loves & is successfully doing, but cannot utilize the built-in antenna
tuner at the same time!
Is anyone familiar with a hardware modification or software modification
which will permit him to utilize both of these great features at the same
time?
Thanks.
bt73Pete, N6ZE
(I'll forward all replies along to N7WLC)
_______________________________________________
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|