VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] ebay 222 transverter boards

To: VHF Contesting Reflector <vhfcontesting@contesting.com>
Subject: Re: [VHFcontesting] ebay 222 transverter boards
From: Zack Widup <w9sz.zack@gmail.com>
Date: Sun, 14 Dec 2014 21:13:31 -0600
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
The 222 MHz transverter design by W1VT that appeared in July 1993 QEX
is a high-performance unit. It does require three circuit boards which
contain printed hairpin filters. (I made mine myself.)

If you're inclined to build something from scratch, I highly recommend
this circuit.

73, Zack W9SZ


On 12/14/14, Dan Evans <dan.evans@insightbb.com> wrote:
> I wanted to take a minute to thank everyone for all of the replies.
>
> The general consensus is these could be a fun project, but they are a long
> way from a high performance transverter.  However, I'm still considering
> buying one and installing it in the empty battery compartment in my
> FT897D...
>
> Although I plan to stick with my original plan to buy a DEMI unit sometime
> in the spring.
>
> 73
> Dan
>
> --
> K9ZF
> Amateur Radio Emergency Service, Clark County Indiana. EM78el
> The once and future K9ZF /R no budget Rover
>  ***QRP-l #1269
> Check out the Rover Resource Page at:
> <http://www.qsl.net/n9rla>
> List Administrator for: InHam+grid-loc+ham-books
> Ask me how to join the Indiana Ham Mailing list!
>
> -----Original Message-----
> From: VHFcontesting [mailto:vhfcontesting-bounces@contesting.com] On Behalf
> Of Erich
> Sent: Sunday, December 14, 2014 1:56 PM
> To: vhfcontesting@contesting.com
> Subject: Re: [VHFcontesting] ebay 222 transverter boards
>
> The PA transistor he is showing there certainly has the capability of
> producing the 10W.  I have been looking at that one for some of my
> projects.  Without going through a full circuit analysis, it looks like
> a fairly straightforward basic transverter,.  It uses dual gate MOSFETs
> for mixers with no LNA, so I would be concerned about the NF and third
> order intercept point.  It looks like it uses diode switching for the
> T/R switching.  Looks like some packaged 97 MHz commercial oscillator
> for the LO; would like to know what the accuracy and stability of that
> is as well.
>
> 73, Erich
> N6FD
> DM15dp
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>